Reprogramming Your Sunstream FloatLift™ Remote

Sometimes it may become necessary to re-program your remote transmitter. It is possible for the transmitter to de-program either due to loss of power (dead battery), or electrical interference.

If your remote will not work, first check to see that it is transmitting. Do this by depressing any of the three buttons and watching to see that the red LED light is working. If so, then the next step is to re-program the receiver.

Programming Instructions RC305

  1. Push 'Up' button once on transmitter
  2. Push programming button on right side of RC Box
  3. Push 'Up' on a transmitter 3 times

Repeat for each transmitter